#10125 Viton® Fluoroelastomer
#10125 is a 60 durometer acid resistant Viton® compound. It has excellent resistance to acids, hot water and low pressure steam, chlorinated solvents, aliphatic and aromatic hydrocarbons, petroleum oils, fuels, ozone and weather, lubricants, and animal or vegetable oils. It has a service temperature range of -10oF to 500oF.
Viton® is not recommended for service in low molecular weight esters and ethers, ketones, certain amines, hot anhydrous hydrofluoric or chlorosulphonic acids and alkyl phosphate esters.
Meets Dupont gasket Code S-23
Light fabric impression finish.
Please allow 2-3 weeks for order processing on some sizes.
The physical properties shown below were obtained on molded 0.080 inch thick ASTM samples. They are typical of #10125 but they should not be used to set Quality Control Specification minimum requirements.
TYPICAL PHYSICAL PROPERTIES
Hardness (shore A): 62
Tensile Strength: 2207 psi
Elongation at Break: 523%
Modulus at 100% Elongation: 1313 psi
Tear Strength: 118 ppi
Specific Gravity: 1.90
Compression Set (22 Hours at 350oF): 33%
Size is Thickness by Width. Continuous Length Rolls--untrimmed.
Viton is a registered trademark of Dupont Dow elastomers.
Price is Per Lineal Yard |
