Home :: CHAMFLEX® Hose Kit #4 Hose Assembly--Hose, Ball Valve, PT Port, Manual Circuit Setter, Shut-Off Valve & 2 PT Ports

CHAMFLEX® Hose Kit #4 Hose Assembly--Hose, Ball Valve, PT Port, Manual Circuit Setter, Shut-Off Valve & 2 PT Ports

Options

Size
Hose Length

Weight	4.50 lbs

Product details
Send to friend
Customers also bought

LARGE INVENTORY OF STOCK SIZES READY TO SHIP!!

Lots of hose, fittings, and valves IN STOCK!!

**MOST ORDERS SHIP WITHIN 24 TO 48 HOURS**

Call 585-758-1031 Today

Stainless steel water source heat pump hose kit has ChamFlex® UL94 VO rated hose with return and supply assemblies. Supply has 600 WOG brass bodied ball valve with one test port. Return has Bell & Gossett Circuit Setter Manual valve, shut off and two test ports. Chamberlin now provides you with superior fire retardant hose assemblies of unparalleled quality and integrity, designed specifically for your water source heat pump applications. Our specially coated braid protects the tube from exterior abrasion and prevents rusting. Assemblies are available in any length. ChamFlex® provides you a hose with a long life of trouble-free service. Our tube compound is tested to and meets UL94 with a VO rating, the highest standard in the industry. The patented process, which bonds the tube to a stainless steel wire outer braid, minimizes the possibility of the hose assembly kinking during installation.
ChamFlex® Advantages:

Superior abrasion resistant properties from our coated wire braid.

The “washer-less” design of the swivel end provides you with ease of installation.

Superior water flow capabilities, due to excellent flexibility of the hose, which also minimizes the possibility of kinking.

All male pipe threads are shipped with thread sealant already applied (eliminating the need for Teflon tape), capped, and ready for installation.

The permanently installed (crimped) end fittings eliminate the possibility of bands or clamps loosening and creating leaks.

Plated steel fittings and adapters reduce the possibility of over-torquing, a common problem with brass and other softer metals.

Assembly Specs.	1/2"	3/4"	1"	1-1/4"
Working Pressure	400 PSI	400 PSI	500 PSI	400 PSI
Min. Burst at Ambient Temp. (70°)	1600 PSI	1600 PSI	2000 PSI	1600 PSI
Min. Bend Radius	2.5"	4"	5.5"	10"
Hose OD ( Approx.)	.700	.975	1.245	1.58
Temp. Range	-40°F to +212°F	-40°F to +212°F°	-40°F to +212°F	-40°F to +212°F

These hose kits are also available in 1-1/2" and 2" hoses. Please see Stainless Steel Hose Kit #4 for more information on those assemblies.

All Hose Kits Are Supplied With Valve HAND TIGHT on Assemblies. Must specify GPM when requesting quote.


X-1174 Extrusion	Solid Silicone Rubber Series 300	Die Cut Urethane



HT-800 1/16", 3/32", 1/8" Thick	Die Cut Buna-N	Edge Trim 100 Series



Die Cut Red Sheet	X-181 Extrusion	COHR 4444 .063" thick Reinforced Silicone Rubber