Home :: Cleanline® Sticky Mat (also known as Tacky Mat)

Cleanline® Sticky Mat (also known as Tacky Mat)

Cleanline® Sticky Mat (also known as Tacky Mat)
Options
Color
Adhesion
Size
Weight 8.25 lbs

Cleanline® Sticky Mats (also know as Tacky Mats) are the standard for cleaning shoe soles before entry into clean rooms.

Cleanline® Sticky Mats have been proven effective in a wide variety of industries, including microelectronics, aerospace, pharmaceutical, food, hospitals, military, and many others. A Sticky Mat is a stack of sheets of polyethylene film, with a specially treated pressure sensitive adhesive on one side. People entering a cleanroom or clean zone walk (and vehicles are rolled) on the mat to remove the last trace of contamination on shoe heels and soles, and on wheels. When a sheet becomes loaded with contamination, it is peeled off, leaving a new, clean sheet for use. This eliminates messy and time-consuming cleaning and washing.

Each Sticky Mat is adhered to the floor or to a frame with either 2" wide double-faced adhesive tape, or with a full bottom sheet of double-faced adhesive. A clear release sheet protects the top sheet of the sticky mat until it is ready for use. Three levels of tackiness are available. Individual sheets are removed by the use of either an uncoated edge, or a cornertab. The cornertabs are consecutively numbered to show the number of remaining sheets. This provides the economy of only one sheet being removed at a time. The Sticky Mat slip is non-contaminating.

Product Information:

Standard Packs: 120 sheets per package, made up of 4 mats of 30 sheets each, or 6 mats of 20 sheets each.

Sizes: 18"x36", 18x45", 24"x36", 26"x45", 36"x36", 36"x45"

Colors: White throughout, Grey throughout, Blue throughout, Clear over white, Clear over Grey, Clear over Blue

Sheet Removal: Integral corner tabs, numbered consecutively to show number of sheets remaining in pad.

Floor Attachment:
1. Full bottom sheet adhesive coated
2. 2" strips of double-faced tape

Installation:
Remove the protective covering from the adhesive bottom sheet and lay the mat on the floor or in a frame. Step on the mat (especially on the edges) to secure it to the floor. Next, remove the protective film on the top of the mat. The mat is now ready to use. When the exposed sheet is contaminated, peel it off and discard it, exposing a new clean sheet for use.

Product Advantages:

  • Numbered corner tabs

  • No sheet delamination

  • No adhesive transfer

  • Smooth, effective surface

  • No time wasted with messy cleaning

  • Choice of colors and adhesive levels


  • Adhesion Values Of Cleanline® Sticky Mats
    Adhesion to Shoe Soles:
    Low Tack: 8.5 - 10.4 oz. sq. in.
    Medium Tack: 11.4 - 13.5 oz. sq. in.
    High Tack: 14.0 - 16.2 oz. sq. in.
: *
: *
: *
 
X-1048 Extrusion
CHAMFLEX® Hose Kit #6
Die Cut Rubber
X-1048 Extrusion CHAMFLEX® Hose Kit #6 Die Cut Rubber
 
Stainless Steel Hose Kit #6 Hose Assembly
Stainless Steel Hose Kit #3 Hose Assembly GPM 45-150-Combination Y-Strainer/Shut-Off Valve, 1 PT Port & Drain Valve, Circuit Sentry Automatic Flow Limiting w/Shut Off Valve & 2 PT Ports
Die Cut Viton
Stainless Steel Hose Kit #6 Hose Assembly Stainless Steel Hose Kit #3 Hose Assembly GPM 45-150-Combination Y-Strainer/Shut-Off Valve, 1 PT Port & Drain Valve, Circuit Sentry Automatic Flow Limiting w/Shut Off Valve & 2 PT Ports Die Cut Viton
 
Strip-N-Stick 512AF
Die Cut SBR
BF1000 1/16", 3/32", 1/8" Extra Soft Cellular Silicone
Strip-N-Stick 512AF Die Cut SBR BF1000 1/16", 3/32", 1/8" Extra Soft Cellular Silicone
 
 
Chamberlin Rubber Company, Inc.
3333 Brighton Henrietta TL Road ~ P.O. Box 22700
Rochester, NY 14692
All Content © 2007 Chamberlin Rubber Company, INC. All Rights Reserved