GTX Female Connector 37 Degree Flare/NPTF :: Tube Fittings :: Fittings & Accessories

Building Contractor/Maintenance Industry

Ducting Products

Expansion Joints

FDA/Food Grade Products

Fittings & Accessories

Gaskets, Seals, & Die-Cuts

Gasket and Sheet Materials

High Temperature Products/Insulation

Hose

Mats, Matting & Floor Safety

Smoke, Flame and Toxicity Tested Extruded and Molded Products

Sponge Products/Foam

Strip-N-Stick

Tapes

Tubing

Weatherstripping

Chamberlin Rubber Company, Inc. :: Fittings & Accessories :: Tube Fittings :: GTX Female Connector 37 Degree Flare/NPTF

GTX Female Connector 37 Degree Flare/NPTF

Click for detail view

Options

Part Number

Quantity

Starting At: $5.67

GTX Female Connector 37 Degree Flare/NPTF
SAE 070103

The Triple-Lok (the 37^o flare fitting) design is very simple. It uses an easily produced flare at the tube end to seal and hold fluid under high pressure. The fitting consists of three pieces: the body, sleeve and nut. The tube end is flared at a 37^o angle and held between the fitting nose (seat) and the sleeve (support) with the nut, providing a very effective (single) seal between the fitting nose and the tube flare.

The support sleeve serves several important functions:

It provides a clamping surface for the tube flare and bearing shoulder for the nut. This minimizes tube twisting during assembly.

It provides support to the flare. The tapered fitting nose tends to wedge open the flare during assembly. The sleeve helps resist this expansion, allowing the fitting to be torqued adequately.

It makes the fitting adaptable to metric tubing merely by changing the I.D. of the sleeve. This feature has made the fittings acceptable worldwide.

Triple-Lok fittings components are produced using the best methods of manufacture and state-of-the-art equipment to assure construction integrity, high strength, long service life and high quality.
Straight bodies are made from either cold drawn bar stock or cold formed construction. All shapes are of one piece forged construction eliminating potential lead paths of multiple component constructiosn such as brazed shapes. The Triple-Lok steel forged shapes also feature higher hardness for high pressure capability and minimal nose collapse (typical of size -10 and under) during repeated assembly.

See detailed image to compare measurements on fitting with table below.

Part Number	End Size 1(in)	End Size 2 (NPTF)	C1 Hex(in)	L2(in)	Std. Pkg.
2 GTX-S	1/8	1/8-27	9/16	1.12	1
4 GTX-S	1/4	1/8X27	9/16	1.19	25
4-4 GTX-S	1/4	1/4X18	3/4	1.39	25
5 GTX-S	5/16	1/8-27	9/16	1.17	1
5-4 GTX-S	5/16	1/4-18	3/4	1.39	1
6 GTX-S	3/8	1/4-18	3/4	1.41	25
6-6 GTX-S	3/8	3/8-18	7/8	1.46	1
6-8 GTX-S	3/8	1/2-14	1-1/8	1.69	1
8 GTX-S	1/2	3/8-18	7/8	1.56	1
8-4 GTX-S	1/2	1/4-18	13/16	1.55	1
8-8 GTX-S	1/2	1/2-14	1-1/8	1.79	1
8-12 GTX-S	1/2	3/4-14	1-3/8	1.85	1
10 GTX-S	5/8	1/2-14	1-1/8	1.89	1
10-12 GTX-S	5/8	3/4-14	1-3/8	1.95	1
12 GTX-S	3/4	3/4-14	1-3/8	2.06	1
12-8 GTX-S	3/4	1/2-14	1-1/8	2.05	1
12-16 GTX-S	3/4	1-11-1/2	1-5/8	2.3	1
14 GTX-S	7/8	3/4-14	1-3/8	2.06	1
16 GTX-S	1	1-11-1/2	1-5/8	2.35	1
16-12 GTX-S	1	3/4-14	1-3/8	2.13	1
16-20 GTX-S	1	1-1/4 - 11-1/2	2	2.44	1
20 GTX-S	1-1/4	1-1/4 - 11-1/2	2	2.49	1
20-16 GTX-S	1-1/4	1 - 11-1/2	1-3/4	2.47	1
24 GTX-S	1-1/2	1-1/2 - 11-1/2	2-3/8	2.62	1
32 GTX-S	2	2 - 11-1/2	2-7/8	2.97	1

Some items may require up to 2 weeks for order processing.

Send to friend