All metal hose assembly. Hose is 321 stainless steel, braid is 304 stainless steel. Supply has Y-Strainer/Shut off and two test ports. Return has Bell & Gossett Circuit Setter Manual valve , shut off and two test ports. Chamberlin now provides you with superior fire retardant hose assemblies of unparalleled quality and integrity, designed specifically for your water source heat pump applications. Assemblies are available in any length. Our hose provides you with a long life of trouble-free service.

All male pipe threads are shipped with thread sealant already applied (eliminating the need for Teflon tape), capped, and ready for installation.

The permanently installed end fittings eliminate the possibility of bands or clamps loosening and creating leaks.

Plated steel fittings and adapters reduce the possibility of over-torquing, a common problem with brass and other softer metals.

Assembly Specs.	1-1/2"	2"
Working Pressure	300 PSI	300 PSI
Min. Burst at Ambient Temp. (70°)	1200 PSI (Hose Only)	1200 PSI (Hose Only)
Min. Bend Radius	10"	14"
Hose OD ( Approx.)	1.95	2.53
Temperature Range	-40°F to 450°F	-40°F to 450°F

Please allow 3-4 weeks for order processing.
All Hose Kits Are Supplied With Valve HAND TIGHT on Assemblies

Please contact our sales department at the phone number above, or use the "contact us" form at the left for volume discount pricing.

Your name:	*
Your email:	*
Recipient's email:	*
Add a personal message
		Send to friend

Die Cut Urethane	HT-800 1/16", 3/32", 1/8" Thick	Die Cut Buna-N
Edge Trim 100 Series	Die Cut Red Sheet	X-181 Extrusion
COHR 4444 .063" thick Reinforced Silicone Rubber	Stainless Steel Hose Kit #3 Hose Assembly GPM 45-150-Combination Y-Strainer/Shut-Off Valve, 1 PT Port & Drain Valve, Circuit Sentry Automatic Flow Limiting w/Shut Off Valve & 2 PT Ports	X-1174 Extrusion