Stainless Steel Braided Corrugated all metal hose assembly. Hose is 321 stainless steel, braid is 304 stainless steel. Supply has combination
Y-Strainer/Shut off , one test port and drain (blow down) valve. Return has 600 WOG brass bodied ball valve with one test port and memory stop. Assemblies are available in any length. Our hose provides you with a long life of trouble-free service.
All male pipe threads are shipped with thread sealant already applied (eliminating the need for Teflon tape), capped, and ready for installation.
The permanently installed end fittings eliminate the possibility of bands or clamps loosening and creating leaks.
Plated steel fittings and adapters reduce the possibility of over-torquing, a common problem with brass and other softer metals.
| Assembly Specs. |
1-1/2" |
2" |
| Working Pressure |
300 PSI |
300 PSI |
|
Min. Burst at Ambient Temp.
(70°) |
1200 PSI
(Hose Only) |
1200 PSI
(Hose Only) |
| Min. Bend Radius |
10" |
14" |
| Hose OD ( Approx.) |
1.95 |
2.53 |
| Temperature Range |
-40°F to 450°F |
-40°F to 450°F |
Please allow 3-4 weeks for order processing.
All Hose Kits Are Supplied With Valve HAND TIGHT on Assemblies
