November 28, 2006, Chamberlin Rubber Company sent a crew to take part in the building of a Habitat for Humanity House located in the city of Rochester, NY.  The Chamberlin crew was particularly luck to have selected a sunny, 65 degree day, almost unheard of for Rochester.

Upon arrival at the house we were given our task for the day - to hang the siding.  We were a small but mighty crew of four, but we had a secret weapon in Sam Pennacchio who has quite a bit of experience with siding.  The rest of the crew was able to catch on fairly quickly and by the end of the day we had completed the better part of three sides of the house.

Overall the experience of helping with the Habitat House was very rewarding for everyone involved.  Upon returning to the office many of our co-workers expressed interest in joining us “next time”!

  Group Shot taken at the start of the day. 

 Sales Manager, Andrew Chase holding the ladder for Outside Sales Representative, Sam Pennacchio.

  Chamberlin President, Bill Lanigan, siding along the “final stretch” of the house.

  Marketing Manager, Andrea Truini, working with Sam Pennacchio to complete the back of the house.

  Group shot at the END of the day - in front of our handy work!

Chamberlin Rubber Company Gears Up for ASHRAE Show in January

Rochester, NY – November, 2006- Chamberlin Rubber Company will be attending the ASHRAE show in Dallas to showcase our world famous CHAMFLEX® Hose Assemblies and CHAMFLEX® Hose Kits used on Water Source Heat Pumps for hotels, schools, yacht clubs, condos, commercial, and industrial buildings. Key features include custom-made Stainless Steel braided hose lengths with tubing that meets UL-94VO Flammability Specifications.
 

CHAMFLEX® has the “patented” process where the tube is bonded to the Stainless Steel Braiding which minimizes “kinking” and provides a better bend radius. The CHAMFLEX® fittings have a washer-less hose swivel and pre-applied thread sealant. Hose kits options include B&G Automatic (Circuit Sentry) and Manual valves (Circuit Setter) and Y-strainers.
As always, Chamberlin Rubber supplies products Factory Direct!
Press Contact:
Chamberlin Rubber Company, Inc.
Andrea Truini Marketing Manager

Phone: 585-758-1023 Fax: 585-427-2429
atruini@crubber.com 

Chamberlin Rubber Company is excited to announce our new die cutting service, EZ Die-Cut™. This new Die cutting service will utilize the convenience of the net to allow any user to request custom die cut quotes via the website, and allow registered users to easily place re-orders for any quantity and variation for their die cut gaskets and seals, and be able to easily make changes to their exising custom die cuts. Chamberlin Rubber Company makes it easy for you to get the die-cut that you need. Some materials include,  Rubber, Sponge, Foam, 3M, Silicone Foam, Neoprene Foam, Viton, 3M Foam Single sided, 3M Foam double sided, Polyurethane Foam, Neoprene, SBR, Silicone, Urethane,  Nitrile, Buna-N, EPDM, Red Sheet, Silicone Sponge, Neoprene Sponge, Viton sponge, Polyurethane Sponge, EPDM Sponge, Cork, Felt, and Teflon.
 Chamberlin Rubber Company can also do die cutting on other materials.